Gema Optistar CG13 Complete Manual Compatible Controller For Powder Coating
Introduction
CG13 powder coating machine is mainly using the principle of electrostatic adsorption, the electrostatic powder spray gun generates high voltage at the front end of the gun after being powered on. The powder is negatively charged after being sprayed from the front of the gun. The charged powder is blown to the surface of the workpiece by high-pressure air, and the workpiece is positively charged, so the powder will be well adsorbed on the surface. After a certain thickness of coating is formed on the surface of the workpiece, the charge will be repelled, and the powder will no longer be adsorbed, so the thickness of the layer is very uniform.
Advantages of electrostatic powder coating
(1) The construction environment and working conditions are good. When spraying in high-voltage electrostatic field, the diffusion of paint mist is far less than that of pneumatic spraying or airless spraying, which significantly improves the pollution of the finishing environment.
(2) High paint utilization. When spraying in high-voltage electrostatic field, paint particles with negative charge are painted on the surface of the workpiece along the direction of the power line. Therefore, there is basically no rebound of paint jet and flying of paint mist. The loss of paint mist is very small, and the utilization rate of paint can reach more than 85% - 90%.
(3) Good finishing quality. When electrostatic spraying is carried out in strict accordance with the correct operating procedures, due to the effect of high-voltage electrostatic field, the coating particles are highly dispersed and evenly distributed in the jet, so the coating formed on the surface of the coated workpiece is also flat and uniform, and the gloss and adhesion of the paint film are high.
(4) High finishing efficiency. The production practice shows that in the electrostatic spraying continuous flow production line, the running speed of the conveyor belt can reach 24m/min, which is far higher than other spraying lines. The comprehensive economic benefits of electrostatic spraying are particularly obvious for wooden parts such as tables, chairs, frames, etc. that cannot be coated by spraying or roller coating.
Quick Details
| Name | Gema CG13 Compatible Manual Compatible Controller | Part number | 1009971 |
| Application mode | flat parts, complex parts and overcoated | Nominal input voltage | 100-240 VAC |
| Frequency | 50-60 Hz | Connected load | 40VA |
| Nominal output voltage to the gun | 12V | Nominal output current to the gun | 1.2A |
| Max pressure | 10 bar | Min pressure | 5.5 bar |
Advantages and selling points
1. Intelligent control
2. Comfortable operation
3. Simple and intelligent operation, reducing human errors
4. Soft powder flow, strong static electricity, high powder loading rate
5. Good aftersale service
6. Less pollution.
7. The film has good performance.
Package
Paper box package
Company Introduction
Astar Machinery Co., Ltd. is a comprehensive service in production, R&D; and sales, operates mainly in electrostatic spraying equipment, including electrostatic dust elimination equipment; electrostatic flocking machine, electrostatic powder spraying machine, electrostatic liquid spray machine, electrostatic spraying gun, high voltage module, circuit board, powder barrel, powder tube, Hv cable, reciprocator, spraying room, control cabinet, oven, oven, vibration sieve, the wind leaching room, supply Gema, KCI, Wagner accessories, professional wholesale gun shell, venturi tube, powder pump, deflector, nozzle, electrode holder and other products.
|
|
Gema Optistar CG13 complete manual compatible Controller For Powder Coating Images
|
